Waterite Vectamaxx RSL 2400 gpd Reverse Osmosis System Free Ship
Waterite Vectamaxx RSL 2400 gpd Reverse Osmosis System
GENERAL SPECIFICATIONS TYPE: Extra Low pressure RO, spiral wound membrane(s) in series, recirculation loop
VOLTAGE: 230VAC/60hz (other voltages available on request)
SERVICE AMPS: 230VAC RSL2400 6.4
FEED WATER PRESSURE: 40 psi minimum, 65 psi maximum
FEED WATER TEMP: 35º C maximum
MATERIAL SPECIFICATIONS: FRAME COLOUR: White powder coat
FRAME MATERIAL: Mild steel square tubular, c/w leveling feet
FRAME DIMENSIONS: Height 50" (127cm) Width 31" (79cm) Depth 24.0" (62cm) OPERATING PRESSURE: 130 psi (9.1 bar) for RSL 2400
MEMBRANE: BLACK MAX®, spiral wound TFC, BME- 4040SXL, 2400 USGPD permeate @ 500 mg/l NaCl, 100 psi, 25ºC feed
UNIT DRY WEIGHT: RSL2400: 127 lbs. (57.6 kg)
INLET SOLENOID: 220VAC/60hz, normally closed, ¾” FNPT, 0 differential, brass LOW PRESSURE SWITCH: 220VAC/60Hz cut-out @ 15 psi DRIVE PUMP MOTOR: 230VAC/60hz, type 56J frame, 3450 RPM, threaded shaft, ball bearing
DRIVE PUMP: Multi-stage 416SS, stainless discharge, housing and bracket, Noryl impellers and stages, SS bearings, wear rings, couplings and pump shaft. RSL2400: 10 USGPM @ 110 psi (Based on 0 psi inlet pressure)
CONCENTRATE VALVE: Brass needle valve, internally bypassed, metal seated, o-ring packing
RECIRCULATION VALVE: Brass needle valve, metal seated, o-ring packing
SYSTEM FITTINGS: Schedule 40 PVC LOW PRESSURE FITTINGS: Jaco standard pressure compression or DMT push-on LOW PRESSURE TUBING: Higher pressure 1/2” LDPE, clear PRE-FILTRATION HOUSING: 1 X Polypropylene, 20”, 125 psi rated, o-ring seated with threaded cap, pressure release, 1” inlet/outlet, full flow, 20 USGPM maximum
FILTER CARTRIDGE: Polypropylene, 5-micron SPEC RO-SYS-002R5 SMEMBRANE HOUSING: 304 SS body, polyethylene caps, band clamp closure, ¾” FNPT concentrate ports, ½” permeate port, 300 psi rating (optional)
PRESSURE GAUGES: Glycerin filled, stainless body, 2 1/2’’. 0-100 psi pre-filter pressure pre/post, 0-200 psi system pressure
FLOW METERS: Acrylic panel mounted, 0.5-5.0 USGPM or 1.0 - 10.0 USGPM, dependent on model
HIGH PRESSURE RELIEF VALVE: Watts model 3L, bronze body, set at 150 psi for 2400-7200
PERFORMANCE SPECIFICATIONS PERMEATE PRODUCTION RATE: RSL2400 1.6 USGPM (6.0 LPM)
Calculated production rate @ feed water of 500 mg/l NaCl, 25ºC, average system pressure @ 130psi, 60 % recovery, inlet pressure of 50 psi.
WASTE PRODUCTION RATE: Recovery Rate @ 60% Feed Water 1000 TDS RSL2400 2.4 USGPM (9.0 LPM)
MEMBRANE CROSSFLOW: RSL2400: (1) 15.1 USGPM (57 LPM) RECOMMENDED FEED WATER PRETREATMENT SPECIFICATIONS: TDS: < 2000 TDS HARDNESS: < 6 gpg (103 mg/l) TOTAL IRON: < .05 ppm TANNIN: < .5 ppm CHLORINE: < .1 ppm pH: 5.5 – 9.5
ORGANIC/MICROBIOLOGICAL ACTIVITY: 0 MANGANESE: < 5.0 E.
FEED WATER REQUIREMENTS: RSL2400: 4.4 USGPM minimum
Please note: These systems are built to order so allow 4-6 weeks for delivery. Also since these are built to order all sales are final.
Overall the system is very compact and efficient. There were some issues on installation. When plumbed and ready for startup the system would not start up as the installation manual instructed. The reason for the failure was that the float switch was not wired into the controller and installed into the permeate tank yet. When the float swithch was wired into the controller it worked excellent.
Thank you Richard for your business, your valuable feedback, and for taking the time to write this review -- much appreciated! We look forward to helping you again soon!
Free Shipping in the United States!
Please note that in spite of Covid 19 we are open and shipping orders. However, as we, our suppliers and all of our Couriers and the Postal Service are short staffed and much busier than usual your order will take longer to get to you. Also, tracking numbers are often late and occasionally inaccurate. All of us are doing our best to get your order to you as quickly as possible and we do appreciate your patience during these very difficult times.
We offer FREE Shipping anywhere in the contiguous United States, however if you're located in an area that is so remote that the shipping costs on your order are so expensive that your order would become unprofitable, we reserve the right to refund your payment and cancel your order or offer to ship to you for an extra cost to make up the difference. Once your order is placed, we process it the next business day and ship via ground transportation. Your items may take anywhere from a few days up to a few weeks to arrive. If you have any special shipping requirements, like requiring a signature at time of delivery, please leave a message in the "Special instructions for seller" section while checking out.
If you order multiple products they may not all arrive at the same time as we ship from multiple warehouses and each item will be shipped directly to you. If no one is home when your order is delivered it will be left for you but we cannot assume responsibility for your order once it has been dropped off. If you have any questions please contact us at info@TheWaterFilterEstore.com
Our Return Policy
View our Return Policy Here