You have a reverse Osmosis Drinking water system AND you want great tasting super pure drinking water for your family. BUT all of a sudden, you are getting almost no water! Check this out! 1) Shut off the water going to your RO system. 2) Shut off the water from the tank and disconnect the tank. Not sure how? This video will show you how   • How to use Quick ...   3) Open up the tank shut off into a sink. If the tank is heavy (full of water) add some air to the shrader valve to push the water out. 4) Once the tank is empty, check the air pressure inside with a low pressure gauge like this onehttps://waterestore.ca/products/ro-ta... to make sure that the pressure is 7 psi. If not slowly add air until it is. 5) Reconnect the tank 6) Allow system 2-3 hours to refill with water Comment and tell me what you like most about your RO water. RO playlist here   • Reverse Osmosis B...   LOVE GARY THE WATER GUY AND WANT TO LEARN MORE ABOUT WATER FILTRATION FOR YOUR FAMILY? HERE ARE SOME NEXT STEPS! 1) SIGN UP TO KEEP IN TOUCH WITH GARY!https://mailchi.mp/waterestore.com/su... 2) LET’S CONNECT!https://www.facebook.com/WaterEstoreCa/https://twitter.com/WaterEstorehttps://www.linkedin.com/company/the-...https://www.instagram.com/Water_Estore/https://www.instagram.com/WaterStoreM... 3) CONTACT! info@WaterEstore.com or info@WaterStoreMidland.com 4) SHOP! Midlandhttps://www.WaterStoreMidland.com Canadahttps://www.WaterEstore.ca USAhttps://WaterEstore.com/