Search

See all of our over 30 Brands

Waterite Vectamaxx RSL 9600 gpd Reverse Osmosis System

FREE SHIPPING

All products include FREE standard shipping in the US!

Waterite Vectamaxx RSL 9600 gpd Reverse Osmosis System | FREE Shipping

✔️ A. GENERAL SPECIFICATIONS
TYPE: Extra Low pressure RO, spiral wound
membrane(s) in series, recirculation loop
VOLTAGE: 230VAC/60hz (other voltages available on
request)
SERVICE AMPS: 230VAC
RSL9600 12.0
FEED WATER PRESSURE: 40 psi minimum, 65 psi maximum
FEED WATER TEMP: 35º C maximum

✔️ B. MATERIAL SPECIFICATIONS:
FRAME COLOUR: White powder coat
FRAME MATERIAL: Mild steel square tubular, c/w leveling feet
FRAME DIMENSIONS:
Height 50" (127cm)
Width 31" (79cm)
Depth 24.0" (62cm)
OPERATING PRESSURE: 130 psi (9.1 bar) 

MEMBRANE: BLACK MAX®, spiral wound TFC, BME-
4040SXL, 2400 USGPD permeate @ 500 mg/l
NaCl, 100 psi, 25ºC feed
UNIT DRY WEIGHT: 
RSL9600: 181 lbs. (82.1 kg)
INLET SOLENOID: 220VAC/60hz, normally closed, ¾” FNPT, 0
differential, brass
LOW PRESSURE SWITCH: 220VAC/60Hz cut-out @ 15 psi
DRIVE PUMP MOTOR: 230VAC/60hz, type 56J frame, 3450 RPM,
threaded shaft, ball bearing
DRIVE PUMP: Multi-stage 416SS, stainless discharge,
housing and bracket, Noryl impellers and
stages, SS bearings, wear rings, couplings and
pump shaft.
RSL9600: 24 USGPM @ 110 psi
(Based on 0 psi inlet pressure)
CONCENTRATE VALVE: Brass needle valve, internally bypassed, metal
seated, o-ring packing
RECIRCULATION VALVE: Brass needle valve, metal seated, o-ring
packing
SYSTEM FITTINGS: Schedule 40 PVC
LOW PRESSURE FITTINGS: Jaco standard pressure compression or DMT push-on
LOW PRESSURE TUBING: Higher pressure 1/2” LDPE, clear
PRE-FILTRATION HOUSING: 1 X Polypropylene, 20”, 125 psi rated, o-ring
seated with threaded cap, pressure release, 1”
inlet/outlet, full flow, 20 USGPM maximum
FILTER CARTRIDGE: Polypropylene, 5-micron
MEMBRANE HOUSING: 304 SS body, polyethylene caps, band clamp
closure, ¾” FNPT concentrate ports, ½”
permeate port, 300 psi rating (optional)
PRESSURE GAUGES: Glycerin filled, stainless body, 2 1/2’’. 0-100
psi pre-filter pressure pre/post, 0-200 psi
system pressure
FLOW METERS: Acrylic panel mounted, 0.5-5.0 USGPM or 1.0 -
10.0 USGPM, dependent on model
HIGH PRESSURE RELIEF VALVE:
Watts model 3L, bronze body, set at 165 psi 

✔️ PERFORMANCE SPECIFICATIONS
PERMEATE PRODUCTION
RATE: RSL9600 6.4 USGPM (24.0 LPM)
Calculated production rate @ feed water of 500 mg/l NaCl, 25ºC, average
system pressure @ 130psi, 60 % recovery, inlet pressure of 50 psi.
WASTE PRODUCTION RATE:
Recovery Rate @ 60%
Feed Water <1000 TDS  RSL9600 4.24 USGPM (16.1 LPM)
Recovery Rate @ 40%
Feed Water >1000 TDS RSL9600 9.6 USGPM (36.0 LPM)
MEMBRANE CROSSFLOW: (1) 8.4 USGPM (32.0 LPM)
(2) 6.7 USGPM (25.3 LPM) (3) 8.4 USGPM (32 LPM) (4) 6.7 USGPM (25.3 LPM)

✔️ RECOMMENDED FEED WATER PRETREATMENT SPECIFICATIONS:
TDS: < 2000 TDS
HARDNESS: < 6 gpg (103 mg/l)
TOTAL IRON: < .05 ppm
TANNIN: < .5 ppm
CHLORINE: < .1 ppm
pH: 5.5 – 9.5
ORGANIC/MICROBIOLOGICAL ACTIVITY: 0
MANGANESE: <.05 ppm
HYDROGEN SULPHIDE: 0
TURBIDITY: SDI < 5.0
E. FEED WATER REQUIREMENTS:
RSL9600: 17.6 USGPM minimum on feed water exceeding 1000 TDS.

✔️ OPTIONAL EQUIPMENT
Auto flush solenoid and timer
Panel mount Permeate TDS monitor
Panel mount Dual Feed/Permeate TDS monitor
12vdc Control for pre-filter backwash cut out contact
Pre/Post Filter Gauges
All materials and components used to fabricate RSL Series systems meet
or exceed requirements specified by NSF Standard 61

R/O RSL9600

Please note:  These systems are built to order so allow 6-8 weeks for delivery.  Also since these are built to order, all sales are final.

File Downloads

Click the button to open the PDF file in your browser. Then you can save the file to your device.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Shipping Policy

We offer FREE Shipping to all contiguous states in the United States. If you would like to order products for shipment to other areas please email us with your shipping address and what you would like to order and we'll email you a draft order which will include any extra shipping costs. Once your order is placed, we process it the next business day and ship via ground transportation. In very remote locations, whenever the shipping costs become prohibitive we reserve the right to either cancel the order or ask that you contribute to the shipping costs, it's up to you. Your items may take anywhere from a few days up to a few weeks to arrive. If you have any special shipping requirements, like requiring a signature at time of delivery, please leave a message in the "Special instructions for seller" section while checking out. If you order multiple products they may not all arrive at the same time as we ship from multiple warehouses and each item will be shipped directly to you. If no one is home when your order is delivered it will be left for you but we cannot assume responsibility for your order once it has been dropped off. If you have any questions please contact us at info@WaterEstore.com

Thank you for your order, we appreciate your business!

Returns

Returns

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

Refunds

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds

  • If you haven’t received a refund yet, first check your bank account again.
  • Then contact your credit card company, it may take some time before your refund is officially posted.
  • Next contact your bank. There is often some processing time before a refund is posted.
  • If you’ve done all of this and you still have not received your refund yet, please contact us at info@WaterEstore.com.

Sale items

Only regular priced items may be refunded, unfortunately sale items cannot be refunded.

Exchanges

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@WaterEstore.com and send your item to: The Water Store 1004 King Street Midland Ontario CA L4R0B8.

Shipping

To return your product, you should mail your product to:

The Water Store
1004 King Street
Midland Ontario CA L4R0B8

You will be responsible for paying for your own shipping, customs and borkerage fees, if applicable, for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Still Got Questions?

Not to worry, we're here to help. Let us know what questions you have about Waterite Vectamaxx RSL 9600 gpd Reverse Osmosis System and one of our experts will get back to you shortly.